Speedslick Pro Bearing Oil by LiveLica

Livelica Speed Skate Bearing Oil is a high-performance lubricant developed for inline speed skating, roller skating, and racing bearings. Its low-friction formula helps bearings rotate smoothly and efficiently while providing reliable lubrication and protection during training and competition.

Designed for high-speed skate bearings, the oil helps maintain smooth rolling performance, reduce friction, and protect precision bearing components from wear. It is suitable for both ceramic and steel skate bearings and is ideal for professional skaters, racers, and regular skate maintenance.

Perfect for inline skate bearings, speed skating bearings, roller skate bearings, and high-performance racing setups. Supplied in a 10 ml precision-tip bottle — one drop per bearing is all you need, so a single bottle services many full sets.

Why choose this skate bearing oil

• Low friction formula — helps bearings spin freely so more of your push becomes forward speed instead of heat and drag.
• High speed bearing lubricant — holds up through hard training sessions and race days without washing out.
• Ceramic bearing lubricant and steel compatible — one oil for every set in your kit bag.
• Protects precision components — reduces wear on balls, races and cages to extend bearing life.
• Precision applicator tip — places a single accurate drop exactly where it is needed, with no mess or waste.

Suitable for

Inline speed skates, roller and quad skates, short track boots, and any setup running standard 608 skate bearings. Equally at home as a racing bearing oil on competition day or as a skate bearing maintenance oil in your regular service routine.

How to use it

1. Remove the wheels and take the bearings out of the hubs.
2. If the bearings are dirty, clean them first and let them dry fully. Oil traps grit, so oiling a dirty bearing does more harm than good.
3. Add one drop of oil into each bearing, through the shield or onto the balls if the shield is removed.
4. Spin the bearing by hand for a few seconds to spread the oil evenly.
5. Wipe away any excess, refit the bearings and wheels, and you are ready to skate.

How much and how often

One drop per bearing is enough. More oil is not faster, because a flooded bearing collects dust and drags. Re-oil when the roll starts to feel short or the bearing sounds gritty, rather than on a fixed schedule. Skaters who train in dust or wet conditions will need to clean and re-oil more often than those who skate indoors on clean floors.

Why a purpose-made oil matters

Household oils tend to fall into two traps. Thick oils, like heavy machine oil, protect well but drag, which slows you down. Very thin oils feel fast at first but thin out or evaporate within a session, leaving the bearing dry. A low friction bearing oil made specifically for skate bearings sits between those extremes, keeping the bearing fast without washing out after a few laps.

What it works with

Suits standard 608 skate bearings and works across the range of steel and ceramic bearings, so it pairs with any set in our speed bearings collection, from entry level steel through to Power Bearings Swiss Ceramic. Even ceramic bearings, which tolerate heat and water better than steel, still need clean oil to run at their best.

Frequently asked questions

How many bearings does one bottle service?

Since you use only one drop per bearing, a 10 ml bottle covers many full sets. A standard pair of four wheel inline skates uses sixteen bearings, so a single bottle lasts a long time in normal use.

Can I use it on ceramic bearings?

Yes. Ceramic bearings still need light lubrication to spin freely and to protect the races. One drop per bearing is the same routine as with steel.

Do I need to clean my bearings before oiling?

If they are dirty, yes. Oil binds to grit, so oiling a dirty bearing traps dust inside and slows it down. Clean first, dry fully, then add one drop.

Will more oil make me faster?

No. Too much oil attracts dust and adds drag. One drop per bearing is the sweet spot between protection and speed.

Which skates is it for?

Any skate that runs standard skate bearings, including inline speed skates, quad and roller skates, and short track boots.

New to bearing care? Read our beginner to pro guide to choosing bearings, or see the full Power Bearings range with prices.